Form Three Physics Current Electricity: Revision Notes, Questions and Answers

Form 3 Physics current electricity revision banner

Current electricity is one of the most calculation-heavy topics in Form Three Physics, and it returns in the Form Four national examination. The good news is that a few formulas solve almost every question. This guide summarises the key ideas, then gives you original questions with full working.

Contents
  1. Key Ideas and Formulas
  2. Practice Questions
  3. Worked Answers
  4. Common Mistakes
  5. Frequently Asked Questions
  6. Final Word

Key Ideas and Formulas

  • Charge: Q = I × t (coulombs = amperes × seconds)
  • Ohm’s law: V = I × R, for a conductor at constant temperature
  • Resistors in series: R = R₁ + R₂ + R₃ (same current through each)
  • Resistors in parallel: 1/R = 1/R₁ + 1/R₂ (same p.d. across each)
  • E.m.f. and internal resistance: E = I(R + r)
  • Electrical power and energy: P = V × I and E = P × t
  • Meters: an ammeter is connected in series; a voltmeter is connected in parallel.

For the complete topic notes, read our Form Three Physics Notes (All Topics).

Practice Questions

  1. A current of 2 A flows through a lamp for 3 minutes. How much charge passes?
  2. A 4 Ω resistor is connected to a 12 V supply. Find the current.
  3. Resistors of 2 Ω, 3 Ω and 5 Ω are connected in series to a 20 V supply. Find the total resistance and the current.
  4. Find the combined resistance of a 6 Ω and a 3 Ω resistor in parallel.
  5. A 4 Ω resistor is connected in series with a parallel pair of 6 Ω and 3 Ω, across a 12 V supply. Find (a) the total current, (b) the p.d. across the 4 Ω resistor and (c) the current in the 6 Ω resistor.
  6. A cell of e.m.f. 6 V and internal resistance 0.5 Ω is connected to a 2.5 Ω resistor. Find the current and the terminal p.d.
  7. An electric cooker draws 5 A from a 240 V supply and is used for 2 hours. Find its power and the energy used in kWh. If one unit costs TSh 350 (an example price), what is the cost?
  8. Explain why an ammeter should have a very low resistance.

Worked Answers

  1. t = 3 × 60 = 180 s. Q = 2 × 180 = 360 C.
  2. I = V ÷ R = 12 ÷ 4 = 3 A.
  3. R = 2 + 3 + 5 = 10 Ω. I = 20 ÷ 10 = 2 A.
  4. 1/R = 1/6 + 1/3 = 1/6 + 2/6 = 3/6, so R = 2 Ω.
  5. The parallel pair is 2 Ω, so total R = 4 + 2 = 6 Ω. (a) I = 12 ÷ 6 = 2 A. (b) V = 2 × 4 = 8 V. (c) The parallel pair gets 12 − 8 = 4 V, so the current in the 6 Ω resistor = 4 ÷ 6 ≈ 0.67 A (the 3 Ω resistor takes about 1.33 A).
  6. I = E ÷ (R + r) = 6 ÷ (2.5 + 0.5) = 2 A. Terminal p.d. = I × R = 2 × 2.5 = 5 V. The missing 1 V is “lost” inside the cell.
  7. P = 240 × 5 = 1200 W = 1.2 kW. Energy = 1.2 × 2 = 2.4 kWh. Cost = 2.4 × 350 = TSh 840.
  8. The ammeter is in series with the circuit. A low resistance means it does not reduce the current it is measuring.

Common Mistakes

  • Forgetting to turn 1/R into R at the end of a parallel calculation.
  • Using minutes or hours instead of seconds in Q = It.
  • Ignoring internal resistance when the question gives it.
  • Mixing watts and kilowatts when calculating the cost of electricity.

Frequently Asked Questions

Is current electricity examined in Form Four?

Yes. The national examination covers the whole O-Level syllabus, so Form Three electricity questions appear in the CSEE.

What is the difference between e.m.f. and terminal p.d.?

E.m.f. is the total energy per coulomb the cell gives. Terminal p.d. is what is left for the external circuit after some is used inside the cell.

Do resistors in parallel always give a smaller resistance?

Yes. The combined resistance is always smaller than the smallest single resistor in the group.

Final Word

Draw a clear circuit diagram for every question, label the values and work step by step. With regular practice, current electricity can become one of your strongest Physics topics. Keep visiting Mitihani for more Form Three revision.

Ask a question or leave a comment

Your email address will not be published. Required fields are marked *

WhatsApp Channel Join Now!